Australian Karting Forum

Hi all,

I have just replaced the brushes in my x30, now when I turn the key nothing at all happens.

The connections to the battery get hot so does the earth on the stater.


Views: 172

Reply to This

Replies to This Discussion

You have obviously reassembled it all wrong.  Take the starter apart again and make sure the wires from the brushes do not touch anything they should not,  and the rubber grommet sits correctly around the brass arm of the brush that has the battery wire bolted to it.

Reply to Discussion



  • Add Photos
  • View All

© 2018   Created by Col Fink.   Powered by

Badges  |  Report an Issue  |  Terms of Service