Kartbook

Australian Karting Forum

Graeme Mcarthur
  • Male
  • Brisbane
  • Australia
Share

Graeme Mcarthur's Friends

  • Damian Cane

Graeme Mcarthur's Discussions

WTB - Arrow AX8/AX9 nosecone (Brisbane North)

Anyone in Brisbane north are who may have a spare nosecone? Its the traditional shape for AX8 AX9. please message 0402831370 if you can help.Continue

Tags: Nosecone, AX8, Arrow

Started Aug 9

When to replace rear axle??

Hi - running a 40 MM rear axle (medium) with 4 stroke. The axle seems straight however there are grooves around the axle where the brake and sprocket carrier are fitted. I have sanded them back smooth however the grooves are still visible. is this…Continue

Started May 9

Axle for sale - 40mm x 960mm $80 Brisbane

40 mm x 960 mm rear axle . Has keyways for inboard/outboard sprocket. Suit arrow kart or similar. See link for photos -…Continue

Started Dec 31, 2017

WTB - WEIGHTS (cheap or giveaway???) Brisbane North
1 Reply

Anyone got some weights they are keen to give away or very cheap? My kart budget is very limited and looking for a bargain. If you can help out please reply on KARTBOOK or TXT 0402831370Continue

Started this discussion. Last reply by Chris and Rhylee McMaster Oct 2, 2017.

 

Graeme Mcarthur's Page

Latest Activity

David Kerwood replied to Graeme Mcarthur's discussion Mobile phone apps for karting data
"You can try race chrono which is available for iOS and android phones. Uses GPS so will drain battery on phone. We use it in circuit racing and its good."
Mar 25, 2017
Chris and Rhylee McMaster replied to Graeme Mcarthur's discussion WEIGHTS WANTED- Brisbane North or North/west
"Go to a dive shop heaps cheaper"
Feb 20, 2017
Matthew Hughes replied to Graeme Mcarthur's discussion Wanted - old/used/broked 219 Chain - Brisbane north-west (Brendale/AlbanyCreek)
"I'll give an example: 10t front 220mm between shaft centres (195mm measured from edge of 50mm axle to centre of engine crankshaft) Rear Sprocket Reqd chain length (rounded to nearest even number of links) 70t 98 72t 100 74t 100 76t 102 78t…"
Nov 18, 2016
Graeme Mcarthur replied to Graeme Mcarthur's discussion Wanted - old/used/broked 219 Chain - Brisbane north-west (Brendale/AlbanyCreek)
"Hi Matthew, Thanks - will let you know - am still messing around with engine mount so will be a while before have exact measurments."
Nov 18, 2016
Matthew Hughes replied to Graeme Mcarthur's discussion Wanted - old/used/broked 219 Chain - Brisbane north-west (Brendale/AlbanyCreek)
"Another racer helped worked this out previously. Can do this with some trig if you can tell me: i) Rear axle size 30, 40 or 50mm ii) Distance between edge of axle and the centre of engine crackshaft with the engine in the middle of the desired…"
Nov 17, 2016
Graeme Mcarthur replied to Graeme Mcarthur's discussion Arrow AX9 - 4 stroke Conversion
"Hi Mike, Do you have any info on engine suppliers for the KX21?? Thanks"
Oct 3, 2016
Graeme Mcarthur replied to Andy East's discussion Advice on converting an Ax9 to suit an inboard Subaru engine.
"Thanks Mitch - will shoot them a message"
Sep 24, 2016
Graeme Mcarthur replied to Andy East's discussion Advice on converting an Ax9 to suit an inboard Subaru engine.
"Thanks Mitch for the tip. Am having trouble finding the fitting guide on the site. Do you have a link??"
Sep 23, 2016
Graeme Mcarthur replied to Andy East's discussion Advice on converting an Ax9 to suit an inboard Subaru engine.
"Hi Andy. I am doing the same conversion (in Qld). I have been assured that AX9's can accommodate Subaru KX21 engine however am still researching. I do not have all the answers however will pass on what info I have. The mounting plate on my kart…"
Sep 21, 2016
Graeme Mcarthur replied to Graeme Mcarthur's discussion Arrow AX9 - 4 stroke Conversion
"Hi mike. Thanks. Have already moved the sprocket (70) inboard. Had the keyway machined on the axle already. Have checked out the link you send and it has been very helpful. Am looking at getting a mounting plate…"
Sep 19, 2016
Mike Best replied to Graeme Mcarthur's discussion Arrow AX9 - 4 stroke Conversion
"Have a look at this http://www.kartbook.net/forum/topics/tech-tip-fitting-4-stroke-engines It shows a KX21 on an AX9. For Lakeside your rear sprocket will be around 70 - (68 to 72). If the axle does not have a keyway cut in the right place for…"
Sep 19, 2016
Graeme Mcarthur replied to Graeme Mcarthur's discussion Arrow AX9 - 4 stroke Conversion
"Hi -thanks for the info. Am new to Karting and gathering info. The engine plate looks like a good solution. Just got to figure out if it lifts high enough for the chain to clear the rear bar. BTW the comp I am looking to run in is Auskart…"
Sep 17, 2016
Kevin Micallef replied to Graeme Mcarthur's discussion Arrow AX9 - 4 stroke Conversion
"Hey mate, you've got a couple of options in the link below depending on what suits your needs. Good luck with it all. Subaru endurance racing is awesome. If you're new to this racing and this engine, PM me. Here's the…"
Sep 17, 2016
Graeme Mcarthur replied to Damian Cane's discussion TECH WEEK - Fitting 4 Stroke engines
"Thanks Damian, your assistance is appreciated. At this point I am in very early stages and have a lot to learn"
Jul 28, 2016
Graeme Mcarthur replied to Damian Cane's discussion TECH WEEK - Fitting 4 Stroke engines
"Thanks Damian - Appreciate any assistance - am a total novice!!"
Jul 28, 2016
Graeme Mcarthur replied to Damian Cane's discussion TECH WEEK - Fitting 4 Stroke engines
"Am in Brisbane - Northside"
Jul 28, 2016

Profile Information

My involvement in karting:
Racer
My race number:
62
The class(es) I race:
Other
My best results:
Ha!!

Graeme Mcarthur's Photos

  • Add Photos
  • View All

Comment Wall

You need to be a member of Kartbook to add comments!

Join Kartbook

  • No comments yet!
 
 
 

Photos

  • Add Photos
  • View All

© 2018   Created by Col Fink.   Powered by

Badges  |  Report an Issue  |  Terms of Service